Graduate School of Semiconductors
교육부가 지원하는 조기취업형 계약학과 반도체대학원(G-반도체공정설비학과)은
반도체 관련/소재/부품/장비 회사에 석사학위로 취업하여 기업의 수요맞춤형 전문인력을 양성하는 과정입니다.
국내특허Cooling module for machine tools with active control applied 한국특허청, 2023 |
SCOPUSDevelopment of drone-attached spraying device for active maintenance of structures Journal of the Korean Society for Precision Engineering, 2023 |
국내특허Geometric error measuring method of five axis machine tool 한국특허청, 2023 |
국내특허Position-independent geometric errors measuring equipment of five axis machine tool and measuring method using the same 한국특허청, 2023 |
국내특허Automatic installation and removal system of calibration sphere 한국특허청, 2022 |
국내특허Drone charging system 한국특허청, 2022 |
SCIEUse of a virtual polyhedron for interim checking of the volumetric and geometric errors of machine tools INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2022 |
SCIEA Dual Difference Method for Identification of the Inherent Spindle Axis Parallelism Errors of Machine Tools INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2022 |
SCOPUSA TCP calibration of a 6-Axis manipulator and geometric errors identification of a tilting-rotary table Journal of the Korean Society for Precision Engineering, 2022 |
국내특허Hybrid magnetic base that can selectively change the direction of magnetic induction force 한국특허청, 2022 |
SCIEIdentification of 11 position-independent geometric errors of a five-axis machine tool using 3D geometric sensitivity analysis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021 |
SCOPUSAn alignment method for a TCP position of five-axis machine tools for ISO 10791-6 Journal of the Korean Society for Precision Engineering, 2021 |
SCOPUSDevelopment and performance evaluation of a fine stage for compensating 6-DOF motion errors of an ultra-precision linear stage Journal of the Korean Society for Precision Engineering, 2021 |
SCIEMachine tool analyzer: A device for identifying 13 position-independent geometric errors for five-axis machine tools INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021 |
SCIEImproved accuracy of an FDM 3D printer using a face-diagonal length test using an artifact and a vernier caliper RAPID PROTOTYPING JOURNAL, 2021 |
국내특허Drone working for an inclined surface 한국특허청, 2021 |
국내특허High efficiency drone work system of parallel simultaneous work and continuous alternation 한국특허청, 2021 |
해외특허Geometric error measurement method for feed drive system and computer-readable recording medium having program recorded for executing same 미국특허청, 2021 |
국내특허Filter assembly installed to air discharge port of air conditioner 한국특허청, 2021 |
국내특허Can-spray spray drones for building repair 한국특허청, 2020 |
국내특허Geometric error measuring method and computer readable record medium having program recorded for executing same 한국특허청, 2020 |
국내특허Drones for installation of sensor modules for structural safety diagnosis 한국특허청, 2020 |
국내특허Drone for structural safety inspection of structures 한국특허청, 2020 |
국내특허Control equipment for repairing drones of architectural structures 한국특허청, 2020 |
국내특허Painting drone and painting system using it 한국특허청, 2020 |
국내특허Drones with contact detection 한국특허청, 2020 |
국내특허Easy battery installable and removable drone and charging module used to the same 한국특허청, 2020 |
SCIESequential measurement of position-independent geometric errors in the rotary and spindle axes of a hybrid parallel kinematic machine INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2020 |
국내특허Drainer with glass cleaning and water repellent function of high-rise structure 한국특허청, 2019 |
SCIEIdentification of inherent position-independent geometric errors for three-axis machine tools using a double ball-bar with an extension fixture INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019 |
SCOPUSThe new measurement technique based on reversal method to measure the squareness error of two-linear axes system Journal of the Korean Society for Precision Engineering, 2019 |
국내특허Silicon maintenance drones for high-rise building windows 한국특허청, 2019 |
국내특허Washing machine internal washing device and cleaning method 한국특허청, 2019 |
국내특허Ball bar with geometric error measuring function 한국특허청, 2019 |
국내특허Pre-load telescoping tube 한국특허청, 2019 |
국내특허Drones with tilting and repairing equipment for crack maintenance 한국특허청, 2019 |
국내특허Cleaning and maintenance of high voltage lines in machining lines 한국특허청, 2019 |
SCOPUSInterim check and compensation of geometric errors to improve volumetric error of machine tools Journal of the Korean Society for Precision Engineering, 2018 |
SCIEFace- and body-diagonal length tests using a double ball-bar for squareness errors of machine tools INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2018 |
국내특허Crack maintenance drone and method using the same 한국특허청, 2018 |
SCIEOptimal on-machine measurement of position-independent geometric errors for rotary axes in five-axis machines with a universal head INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2018 |
국내특허Geometric error measuring method and computer readable record medium having program recorded for executing same 한국특허청, 2017 |
SCIEInterim check and practical accuracy improvement for machine tools with sequential measurements using a double ball-bar on a virtual regular tetrahedron INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017 |
SCIEParallelsim error measurement for the spindle axis of machine tools by two circular tests with different tool lengths INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017 |
SCIECompensation of position-independent and position-dependent geometric errors in the rotary axes of five-axis machine tools with a tilting rotary table INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016 |
SCIECompensation of position-independent geometric errors of an index table by linear axes circular tests at different angular positions INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016 |
SCIDevelopment of compact three-degrees-of-freedom compensation system for geometric errors of an ultra-precision linear axis MECHANISM AND MACHINE THEORY, 2016 |
국내특허Method to measure geometric error of linear feed system 한국특허청, 2014 |
SCIECircular tests for accurate performance evaluation of machine tools via an analysis of eccentricity INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014 |
SCOPUSPerformance evaluation of five-DOF motion under static and dynamic conditions of ultra-precision linear stage Journal of the Korean Society for Precision Engineering, 2014 |
SCIEPerformance evaluation of five-DOF motion in ultra-precision linear stage INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2014 |
SCIMeasurement and verification of position-independent geometric errors of a five-axis machine tool using a double ball-bar INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013 |
SCIERobust measurement method and uncertainty analysis for position-independent geometric errors of a rotary axis using a double ball-bar INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2013 |
SCIEThe optimal design of a measurement system to measure the geometric errors of linear axes INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013 |
SCOPUSMeasurement method for geometric errors of ultra-precision roll mold machine tool: simulation Journal of the Korean Society for Precision Engineering, 2013 |
SCIAccuracy evaluation of machine tools by modeling spherical deviation based on double ball-bar measurements INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013 |
국내특허Method for estimating geometric error between linear axis and rotary axis in a multi-axis machine tool 한국특허청, 2013 |
국내특허Apparatus for measuring roll error and method for measuring roll error thereof 한국특허청, 2013 |
SCIEParametric modeling and estimation of geometric errors for a rotary axis using double ball-bar INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012 |
KCIPerformance evaluation of radial error of a rotary table at five-axis machine tool Journal of the Korean Society of Manufacturing Technology Engineers, 2012 |
SCOPUSThe novel calibration method for 3-DOF measurement system APPLIED MECHANICS AND MATERIALS, 2011 |
SCOPUSA novel measurement system to evaluate the six geometric errors of rotary table ADVANCED MATERIALS RESEARCH, 2011 |
SCIEIdentification and measurement of meometric errors for a five-axis machine tool with a tilting head using a double ball-bar INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011 |
SCOPUSGeometric errors estimation of a rotary table using double ball-bar Journal of the Korean Society for Precision Engineering, 2010 |
SCIFabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009 |
SCOPUSDesign and testing of a long stroke fast tool servo for ultra-precision free-form machining Journal of the Korean Society for Precision Engineering, 2009 |
SCIEDevelopment of a programmable vibration cutting tool for diamond turning of hardened mold steels INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009 |
내역 | 기관명 | 기간 |
---|---|---|
한국정밀공학회 편집이사 | 한국정밀공학회 | 2022.01.01-2022.12.31 |
한국정밀공학회지(SCOPUS) 편집위원 | 한국정밀공학회 | 2022.01.01-2022.12.31 |
International journal of precision engineering and manufacturing(SCIE) Editorial board | 한국정밀공학회 | 2022.01.01-2022.12.31 |
KUKA 로봇 기반 DED 금속 3D 프린팅 적층 장비 전문가 자문 | 경북대학교 첨단기술원 레이저센터 | 2021.12.21-2021.12.21 |
고신뢰성 기계부품 설계 전문인력양성 산학프로젝트 평가위원회 | 한국공작기계산업협회 | 2021.12.07-2021.12.07 |
DED 금속 3D프린팅 장비 전문가 자문 | 경북대학교 첨단기술원 레이저센터 | 2021.10.18-2021.10.18 |
도심지 협소지역 중대구경 지반 기초공사를 위한 하부 개방형 케이싱 로테이터의 최적화 설계 기술평가위원회 | 한국생산기술연구원 첨단메카트로닉스연구그룹 | 2021.09.16-2021.09.16 |
International journal of precision engineering and manufacturing(SCIE) Editorial board | 한국정밀공학회 | 2021.01.01-2021.12.31 |
케이싱 오실레이터의 최적화 구조 해석을 통한 경량화 설계 기술 개발과제 기술평가위원회 | 한국생산기술연구원 안전시스템연구그룹 | 2020.07.30-2020.07.30 |
Robotics 제조현장방문 스마트화 수요기술 Skill up 교육 | 경북대학교 뇌수술로봇시스템연구소 | 2020.07.15-2020.07.23 |
International journal of precision engineering and manufacturing(SCIE) Editorial board | 한국정밀공학회 | 2020.05.01-2021.04.30 |
한국정밀공학회지(SCOPUS) 편집위원 | 한국정밀공학회 | 2020.01.01-2020.12.31 |
한국정밀공학회 공작기계 부문이사 | 한국정밀공학회 | 2020.01.01-2020.12.31 |
산업핵심기술개발사업 실무위원 | 한국산업기술평가관리원 | 2019.11.15-2019.11.15 |
한국정밀공학회지(SCOPUS) 편집위원 | 한국정밀공학회 | 2019.01.01-2019.12.31 |
Motion Simulator 기반 특수목적기계의 가상 환경 구축 관련 기술평가 위원 | 한국생산기술연구원 | 2017.12.22-2017.12.22 |
DB 시스템 유지보수 제안 평가위원 | 한국생산기술연구원 대경지역본부 | 2017.09.12-2017.09.12 |
박사후연수연구원/전임연구원 | 경북대학교 기계연구소 | 2013.03.01-2017.02.28 |
선임연구원 | 고등기술연구원 | 2006.03.13-2009.01.31 |
연구원 | (주)쓰리비시스템 | 2005.01.01-2006.03.10 |